The collector unit with built-in flowmeters is available for distribution of the coolant to consumers in water heating systems – radiators, convectors, underfloor heating loops, and heating of open areas. At the outlets of the direct collector, tuning valves with flow meters are installed, the return manifold is equipped with thermostatic valves (manual, with the possibility of equipment with servo drives). Connection of pipelines to the outlets – according to the Euroconus standard. The unit is also equipped with automatic air vent with shut-off valves, drain valves, dual mounting brackets. Material collectors, fittings cases – brass CW617N (electroplating – nickel plating),
O-rings of connectors and valve spools – EPDM.
| Size, G1 | 1” | |
| G2 × C × E × F, mm | 3/4″× 50 × 210 × 322 | |
| Working pressure, bar | up to 16 | |
| Maximum temperature of the working medium, ℃ | 90 | |
| Thermostatic valve nominal flow capacity, m3/hour | 2,5 | |
| Conditional capacity of the control valve at the flow meter readings, m3/hour: | ||
| 0,5 lpm | 0,11 | |
| 1,0 lpm | 0,22 | |
| 2,0 lpm | 0,43 | |
| 3,0 lpm | 0,65 | |
| 4,0 lpm | 0,86 | |
| 5,0 lpm | 1,10 | |
| Maximum air temperature surrounding the assembly, ℃ | 50 | |
| Flowmeter capacity, lpm | 0-5 | |
| Material manifolds, valve bodies | Brass CW617N Chrome plated | |