The combination hot water filter with 1/2″, 3/4″, 1″ connection combines a pressure reducing valve and a fine washing filter.
The filter with a hot water pressure reducer and a 10 bar axial pressure gauge allow to clean hot water from rough impurities (sand, rust, etc.) and to reduce the excess pressure of hot water to a given value (regulated manually by the green cover on the filter) which is set by the manometer, which this filter with a pressure-reducing reducer is equipped with.
Practical and inexpensive solution for hot water filtration in apartments and private houses with a hot water supply from the city mains. The 60 micron stainless steel mesh prevents the penetration of mechanical particles into the apartment or house – thus prolonging the operation of plumbing and household appliances. The small size allows this combination filter to be installed on the hot water pipe in areas where space is limited. During normal operation, the water passes through the filter cells to the outlet.
| Size, G | 1/2″ | 3/4″ | 1″ |
| A × B × C, mm | 143 x 250 x 99 | 150,5 x 250 x 99 | 155 x 250 x 99 |
| Medium | water | ||
| Installation position | horizontal, filter bulb facing downwards | ||
| Filtration degree, μm | 60 | ||
| Max. working pressure, bar | 16 | ||
| Output pressure setting range, bar | 1,5-6,0 | ||
| Maximum operating temperature, ℃ | 70 | ||
| Body material | Brass CW617N | ||