TM KOER TM centrifugal surface self-priming pumps are designed for water supply in low-pressure pipelines. They are used for domestic water supply. They are used for irrigation systems of gardens, vegetable gardens, greenhouses and greenhouses.
Pumping part
– Casing: cast iron with anti-corrosion coating and 20% thicker casing.
– Impeller: brass
– Motor shaft: stainless steel AISI 304
Conditions of use
– Pumped liquid: Fresh water.
– Degree of contamination: max 200g/m3
– Ambient humidity: <90%
– Ambient air temperature: + 2 ℃ … + 40 ℃
– Pumped water temperature: + 5 ℃ … + 40 ℃
– Mineralization not more than 1000 mg/L
– Impurities not more than 0.01%.
– Maximum working pressure: 0.7 MPa (7 bar)
– Max. suction depth: 9 m.
Motor
– Motor type: asynchronous, closed circuit motor with thermal cut-out in the winding
– Stator winding: 100% copper
– Insulation class: F – motor temperature resistance up to 155 ℃
– End face seal: graphite / ceramic / NR / AISI 304
– Voltage: 220-240V
– Frequency: 50 Hz
– Protection class: IP 54
– Cable length: 1 m.
– Mode of operation: continuous.
| Model | JET-60 | JET-100 | JET-100B | JET-125 | |
| Power | kW | 0,37 | 0,75 | 0,75 | 1 |
| hp. | 0,5 | 1 | 1 | 1,5 | |
| Q max (l/min) | 55 | 50 | 70 | 75 | |
| H max(m) | 30 | 43 | 35 | 45 | |
| Q max (m3/hour) | H(m) | ||||
| 0 | 30 | 43 | 35 | 45 | |
| 0,5 | 28 | 36 | 32 | 43 | |
| 1 | 26 | 32 | 30 | 40 | |
| 1,5 | 22,4 | 26 | 26 | 36 | |
| 2 | 20 | 20 | 24 | 32 | |
| 2,5 | 15 | 16 | 20 | 28 | |
| 3 | 10 | 8 | 16 | 23 | |
| 3,5 | 5 | – | 12 | 18 | |
| 4 | – | – | 7 | 12 | |
| 4,5 | – | – | – | 6 | |
| Gross weight, kg | 11,1 | 12,5 | 12,9 | 17,3 | |
| Dimensions: L × W × H, mm | 415 × 180 × 210 | 440 × 205 × 235 | 440 × 205 × 235 | 490 × 205 × 235 | |