Pumps of series KR.P15 are a successful solution for increasing pressure in water supply systems. The pumps are characterized by ease of operation, high level of reliability. The products can be used in apartments, private houses, cottages. These pumps are intended for pressure boosting in one or several water consumption sites.
Pumping part
– Body: stainless steel
– Shaft motor: stainless steel AISI 430F
– Impeller: brass
Conditions of use
– Degree of contamination: not allowed
– Ambient air temperature: + 5 ℃ … + 40 ℃
– Pumped liquid temperature: 0 ℃ … + 45 ℃
– Maximum working pressure: 1.0 MPa (10 bar)
– Installation length: 140 mm (with flow sensor)
– Diameter nominal bore: 15 mm
– Connection: ¾“.
– Number of operating modes: 2
– Media: water, non-flammable and non-aggressive liquids, possibly with dissolved air
– Degree of contamination: max. 20 g/m3
– Ambient humidity: <90%
– Mineralization max 1500 mg/l
– Content of mechanical impurities, max 0,01%
– Max working pressure: 0,7 MPa (7 bar)
– Inlet pressure: minimum 0.04 MPa.
Motor
– Motor type: asynchronous, closed-type, with thermal protection built into the winding
– Stator winding: 100% copper
– Insulation class: B – motor temperature resistance up to 130 ℃
– End face seal: graphite / ceramic / NBR / AISI 304
– Voltage: 220-240V
– Frequency: 50 Hz
– Protection class: IP 54
– Cable length: 1m.
– Mode of operation: continuous
Accessories:
Pump, flow sensor, brass nuts, cable 1.3 m, instruction manual.
Technical characteristics
| Model | Power | Q max (l/min) |
H max (m) |
Power, W | Pressure, m | Supply, l/min | |
| kW | hp. | ||||||
| KP.P15-GRS10 | 0,09 | 0,12 | 13 | 10 | 90 | 10 | 13 |
| KP.P15-GRS15 | 0,12 | 0,16 | 25 | 15 | 120 | 15 | 25 |
Габаритно-весовые характеристики
| Model | Gross weight, kg | Package length, mm | Package width, mm | Package height, mm |
| KP.P15-GRS10 | 2,71 | 245 | 155 | 130 |
| KP.P15-GRS15 | 2,76 | 245 | 155 | 130 |