Purpose and application:

Circulation pumps with 280 mm mounting length and backward flanges are used to pump the heat carrier in heating systems, underfloor heating systems, hot water supply systems. The heat transfer medium can be both pure fresh water and a liquid with 50% glycol impurities. Pumps of this type significantly improve efficiency of heating systems. The pumps are characterized by low noise level, simple and reliable design. They are a good solution in apartments, private houses, cottages, agriculture, warehouses, industrial facilities, livestock.

Pumping part:

  • Aluminum and cast iron, treated with cataphoresis anti-corrosion treatment and water resistant painting.
  • Impeller: stainless steel
  • Motor shaft: stainless steel

Conditions of use

  • Heating medium: Fresh water. Liquid containing glycol up to 50% may be used with significant impairment of pump performance.
  • Degree of contamination: not permissible
  • Ambient humidity: < 60%
  • Ambient air temperature: + 5 ℃ … + 40 ℃
  • Pumped liquid temperature: -5 ℃ … + 110 ℃
  • Max working pressure: 1.0 MPa (10 bar)
  • Fitting length: 280 mm
  • Orifice diameter: 40-65 mm, depending on the model, as indicated by the first two digits.
  • Connection: Flanged, depending on the model.
  • Number of operating modes: 1.

Motor

  • Motor type: asynchronous, closed-type, with thermal protection built into the winding
  • Stator winding: 100% copper
  • Insulation class: F – motor temperature resistance up to 155 ℃
  • Bearings: Stainless steel
  • Voltage: 1~220-240V
  • Voltage: 3~380 – (GRS 65/11F)
  • Frequency: 50 Hz
  • Protection class: IP 44
  • Cable length: 1.3 m.
  • Mode of operation: continuous

Accessories:

Pump, flanges, cable 1.3 m, instruction manual.

Model Voltage, V DN, mm Power Q max
(l/min)
H max
(m)
kW hp.
GRS 40/10F 1~220-240 40 0,55 0,75 300 10
GRS 50/15F 1~220-240 50 1,1 1,5 370 15
GRS 65/11F 3~380 65 1,5 2,0 750 11

Size and weight characteristics

Model Gross weight, kg Package length, mm Package width, mm Package height, mm
GRS 40/10F 21 255 280 330
GRS 50/15F 25,5 310 270 350
GRS 65/11F 33,5 245 175 300